Mobile Weigh-In-Motion System Gets You Operational Within Minutes.
Intercomp’s Weigh-in-Motion software works with the LS700 Low Profile Weigh Pads. It is intended for low speed weighing and can be used for both static and dynamic weighing. The system will display the current weight when it is in the static weighing mode. When weighing dynamically, the system automatically starts the digital weighing algorithm and processes the data quickly to determine the most exact information.
FEATURES:
- Static & Dynamic Applications
- Quick & Easy Setup
- Low Profile Weigh Pads
- Automatic Vehicle Identification
- Multiple Site Data Collection
- Self-Calibrating System
- Overload & Overspeed Reports
- Law Enforcement & Fleet Management Software
- Screening for Overloaded Vehicles
- Full Statistical Analysis of Vehicle Types & Classifications
- Stoplight & Traffic Control
- Calculates Center of Balance
Designed for portable Weigh-in-Motion systems, these weigh pads are only 1” in profile. They are fabricated from high strength aluminum and have a capacity of up to 40,000 lbs/20 tons
per pad. Each pad has a flexible and quick disconnect connector for easy setup. These weigh pads can be used with or without leveling approach pads. For higher accuracy we recommend the use of approach and exit pads. Each pad spans approximately three feet in length, and ensures that the vehicle stays level during the weighing process. The leveling pads and ramps are made from a high compression strength composite material. They are easy to setup and take down. Angled ends provide a smooth transition from the road surface to the elevated runway. The approach and exit pads attach to the weigh pads to ensure that they stay in place at all times. Since the pads are modular, you can order as many or as few sections as you need, depending on the size of vehicle you are weighing.
When weighing dynamically, the Weigh-in-Motion software starts taking samples and saves them to be analyzed after the weighing period has expired. This is a variable, set long enough to weigh a large multi-axle vehicle. The software then analyzes the data collected and determines the weight of each axle and the total weight of the vehicle among other statistics. When the weighing is completed, the data is shown, and a graph is displayed to indicate the number of axles weighed, axle spacing, velocity and list of overloaded axles or axle groups.
Available in Two, Four, or Six pad configurations to best meet your needs.
SYSTEM INCLUDES:
- 2, 4, or 6 WIM Pads (depeding on your choice)
- Leveling Pads
- Fort/Aft Ramps
- WIM J-Box
- Interconnect Cables
- Notebook Computer with WIM Software
- Crate
|
|
